ECO POWER GROUP

Low-voltage wiring and power

Wiring and power

The part of the job that decides whether the system stays reliable.

Camera and doorbell failures are usually cable, power or connector problems. This work is carried out by qualified electricians.

01

Low-voltage runs

Cable sized and routed for the device load and distance, with containment where it is exposed.

02

Power connections

Connections made to the requirements that apply on site, tested and left accessible for future service.

03

PoE and network

Switch ports, injectors and patch leads checked so cameras are not running at the edge of their power budget.

How the work is done

Practical constraints, stated up front.

01

Routes agreed first

Surface, conduit or concealed — you approve the route and any making good before we start.

Before work

02

Making good

We fill and seal cable entries; decorating is not included unless agreed in the quote.

On site

03

Testing

Continuity, voltage and device boot verified before configuration begins.

On site

04

Documentation

Cable routes and device locations recorded for future maintenance.

Handover

Need wiring quoted?

Send photos of the positions and the route you have in mind.