The playbook we use on site, published as checklists.
Pre-purchase checks, survey output, day-of sequence, handover tests, glossary, questions to ask any installer, and a first-year maintenance schedule.
Installation and handover playbook
This page collects the checklists we use on site, in the order they are used, together with the reasoning behind each item and a plain-language glossary. It is written so that a client can use it to prepare, and so that an installer can use it as a working document.
Part 1 · Before you buy anything
Purchasing before surveying is the most expensive mistake in this category. Devices bought for the wrong position are either returned at a loss or installed where they perform badly.
- List the entrances and approaches that need coverage, and note the time of day each is busiest.
- For each position, note whether mains power is present, or whether a cable can reach a PoE switch.
- Measure Wi-Fi signal at the actual position — not at the front door — if wireless devices are being considered.
- Decide whether the requirement is to identify people or merely to observe activity; the two need different lenses.
- Agree how many days of footage are needed, and whether that applies to every camera or only some.
- Confirm who will receive alerts, and who will act on them at 2 a.m. if that is part of the requirement.
- Check whether the property is rented, listed, or subject to restrictions on external fixtures.
Part 2 · What the survey should produce
A survey that produces a verbal opinion is not a survey. The output should be a written scope that a second installer could work from.
- A plan or marked-up photograph showing each device position and the field of view.
- The cable route for each device, with containment and making-good described.
- Power source and, for wired doorbells, the measured transformer output against the device requirement.
- Recorder location, disk size, and the retention days that size supports.
- A device count with models, and a clear statement of what is excluded.
- Access notes: parking, keys, alarm codes, and who will be present.
Part 3 · Preparing for the day
- Clear the areas where devices will be mounted and cables routed; furniture moved away from walls.
- Have the Wi-Fi name and password available, and a phone that can receive alerts during the visit.
- Decide where the recorder will live: ventilation, power, and not in reach of the front door.
- Confirm access arrangements, including any gate or communal door that needs a code.
- Agree who will be present at handover to learn the app — ideally the person who will use it most.
- Move or cover anything that could be damaged by dust, particularly near drilling points.
Part 4 · On-site sequence
- Protect floors and surfaces; confirm the scope and routes with the client before drilling.
- Mark positions, check the view through the camera before fixing anything permanently.
- Mount devices using fixings appropriate to the substrate; seal cable entries.
- Run and test cabling; confirm power and continuity before energising devices.
- Configure devices, recorder, storage, motion zones and notification rules.
- Test live view, playback, alerts and restart recovery with the client present.
- Hand over accounts, record device locations, and leave the documentation on site.
Part 5 · Handover checklist
- Every channel opened live on the client’s own phone, not the installer’s.
- Playback retrieved from the oldest day of the retention window.
- A motion alert triggered and received on the device the client will carry.
- Recorder power-cycled to prove automatic recovery.
- Account ownership transferred to the client’s email address, with recovery details recorded.
- Shared users configured, with roles appropriate to each person.
- Device locations and cable routes written down and left on site.
- Retention days and disk size recorded, so the next inspection has a baseline.
Part 6 · Glossary in plain terms
PoE — Power over Ethernet
One cable carries both data and power to the camera. It removes the need for a mains socket at the camera position, but the switch or injector must have enough power budget for every device, including the extra draw when infrared illumination switches on at night.
Retention
The number of days of footage the system keeps before overwriting the oldest. It is a decision with a storage cost, not a default setting.
Motion zone
The part of the image that triggers recording or an alert. Excluding the road, the pavement and moving foliage is usually the difference between a system that is used and one that is muted.
Commissioning
The configuration and testing step: firmware, accounts, storage, alerts, and proof that each part works. It is what separates an installed system from a box of working hardware.
Recorded pixel width
The number of pixels across a subject’s face in the recorded image. Roughly 80–120 pixels allows identification; below that, the footage shows that somebody was present but not who.
Overwrite
The behaviour of a recorder when the disk is full: it deletes the oldest footage to make room. Normal and desirable — provided somebody knows it is happening and how many days it represents.
Part 7 · Questions to ask any installer
- Which positions have you chosen, and what will each one actually see?
- What is the retention in days, and what disk size supports it?
- What will you test with me before you leave, and will you show me the playback?
- Who will own the device account at the end, and what happens to your access?
- What is excluded from the quote — making good, decorating, additional cable, out-of-hours work?
- What happens if the site differs from the survey: do you stop and quote, or proceed and invoice?
An installer who answers those six without hesitation is describing a process. One who deflects to the product datasheet is describing a sale.
Part 8 · First-year maintenance schedule
- Month 1: check that recording is continuing and that the disk is not filling faster than expected.
- Month 3: confirm notification rules still suit the household or business; adjust seasonal zones.
- Month 6: inspect outdoor cable entries and seals; clean lenses; verify playback again.
- Month 12: full inspection — mounts, seals, cabling, storage health, firmware and account access.
Most failures in the first year are configuration drift rather than hardware faults: an update resets a zone, a new phone does not receive alerts, a departed employee still has access. A short inspection catches all three.
Part 9 · Troubleshooting quick reference
The following symptoms account for most call-outs in the first two years. Each one has a cause that can be checked before anyone books a visit.
Live view works, playback does not
Almost always storage: a failed disk, a full disk with recording stopped, or a recorder configured to record only on motion in a schedule that excludes the hours in question. Check disk health and the recording schedule before replacing hardware.
The doorbell rings indoors but the phone does not
The chime is wired and working, but the device has dropped off the network. Check the router client list, then the device signal at the door. A weak signal that worked in summer often fails when the door is cold and wet.
Alerts arrive hours late
Usually upload bandwidth or a cloud plan that throttles event delivery. Trigger an alert while watching the router throughput. If the connection is saturated by continuous recording, switch to motion-only uploads.
One camera is dark at night
Infrared illumination is reflecting off a nearby surface — a wall, a soffit, a gutter — or the camera IR cut filter has failed. Repositioning by twenty centimetres often fixes the first; the second needs a replacement unit.
The picture is soft on one side
Either the lens has drifted out of focus after a knock, or the housing seal has failed and there is moisture behind the glass. Both are visible on inspection and neither improves on its own.
Nobody can log in
Account ownership problem: the original email address is no longer accessible, or the password was never recorded. Recovery is possible with proof of purchase, but it takes days. It is the strongest argument for transferring the account to the client at handover.
Part 10 · What a well-stocked installation visit includes
A small detail that affects the day: the parts that are easy to forget and expensive to fetch. Our standard kit for a domestic visit includes cable, connectors, glands, sealant, a range of fixings for brick, render, timber and steel, a spare transformer, a network cable tester, and a phone with the app already installed for testing.
For commercial work, add a label printer for cable and port identification, a small UPS for testing recovery behaviour, and a laptop for recorder configuration where the web interface is more capable than the app.
None of this is glamorous. It is the difference between finishing at 15:30 and returning the next day for a five-euro part.
Part 11 · Handover document template
What we leave on site, in one or two pages:
- Device list with model, position and IP or channel number.
- Recorder location, disk size, retention days and recording mode.
- Account owner, recovery email, and the date access was transferred.
- Shared users and their roles.
- Notification rules, and the phone numbers they target.
- Tests performed at handover, with the date and who witnessed them.
- Support contact and the procedure for reporting a fault.
A client who has that page can answer almost any question about the system a year later without calling anyone. That is the point of it.