The part of the job that decides whether the system stays reliable.
Camera and doorbell failures are usually cable, power or connector problems. This work is carried out by qualified electricians.
Low-voltage runs
Cable sized and routed for the device load and distance, with containment where it is exposed.
Power connections
Connections made to the requirements that apply on site, tested and left accessible for future service.
PoE and network
Switch ports, injectors and patch leads checked so cameras are not running at the edge of their power budget.
Practical constraints, stated up front.
Routes agreed first
Surface, conduit or concealed — you approve the route and any making good before we start.
Before work
Making good
We fill and seal cable entries; decorating is not included unless agreed in the quote.
On site
Testing
Continuity, voltage and device boot verified before configuration begins.
On site
Documentation
Cable routes and device locations recorded for future maintenance.
Handover